welcome to E_T Z4 ... an attempt at providing help when it can't be found. So now you can finally dust off your expensively over-sized paperweight and maybe actually make the seemingly broken blighter work...

KORG Zero4... officially discontinued but that doesn't mean the support has to


THE FACTS 
versus the nonsense 

Showing category "Korg Zero 4 midi" (Show all posts)

Z-4's built in Master MIDI clock generator and control

Posted by Eksovichea Tito Hak on Wednesday, February 6, 2013, In : Korg Zero 4 midi 

 
One of the original draws of the Zero 4 and zero 8 mixers was the inclusion of a Master global midi clock generator and control section built into the actual mixer.  I generally found it to be a very tidy solution for chaining and syncing multiple midi devices/instruments that needed to be kept in sync with a setup. 

The presence of the MIDI clock generator control section on the mixer is intuitively implemented through what would normally be used for auto BPM counter/BPM sync and adjustment ...

Continue reading ...
 

Using MIDI foot pedals with the Z4

Posted by Eksovichea Tito Hak on Wednesday, August 15, 2012, In : Korg Zero 4 midi 
 
 
Its MIDI, its mechanical, and it aint ugly. Whether you're working it in as part of your live Zero 4 DJ/production setup, or for rocking out with a stringed axe to better harness lives effects modules in a more intuitive way, you couldn't go too far wrong with the German behringer offering. Price varies from $140 to $200 depending on where you buy from. But don't take my word for it you check out the full low-down from owners over at the Ableton forums by clicking this or you can get to the...
Continue reading ...
 

Using the Zero 4 with a Mac and Traktor pro (...plug in to play)

Posted by Eksovichea Tito Hak on Monday, August 13, 2012, In : Korg Zero 4 midi 

 
The sum of it? It doesn't need any additional system drivers for using it with Trakor pro from what I can gather. You just need to plug it in and set the midi in/out setting appropriately from within the Traktor app control menus if you want midi control assign features to work. But I'm just repeating here. Here's the actual thread as detailed by Skratchlounge.


For extra reassurance check this review out over at Skratch...
Continue reading ...
 

How to "cue monitor" (better refered to as pre-mix monitoring) on the Zero 4 when using all four ASIO channels for main/room mix output in total MIDI mode (via a seperate soundcard)

Posted by Eksovichea Tito Hak on Monday, August 13, 2012, In : Korg Zero 4 midi 

 
If you're using the mixer in analogue mode or hybrid audio mode then you should have no problems using the pre-mix monitor as normal. However, the problem arises if you are using the mixer in total midi mode (when nearly all the lights on the mixer are green) and want to use all 4 ASIO channels in your chosen DJ application or DAW app, under these circumstances when all the ASIO channels are required for post mix/main room output its not possible to pre-mix monitor.

Just so there is no mix up...

Continue reading ...
 

How to fix midi control assignment problems on the Zero 4 (Hard reset procedure)

Posted by Eksovichea Tito Hak on Thursday, August 9, 2012, In : Korg Zero 4 midi 

 
I reckon there might be a few abandoned Zero4 mixers out there if not re-purposed or just sold on because of this fixable issue. You might have ran into this issue whilst trying out many various DJ or production antics that you can do with what is  a pretty versatile digital/analogue mixer.

These issues only occurs in full MIDI control mode and not analogue/digital or analogue/digital/Midi hybrid mode.

symptoms: If you found that the MIDI implementation is all messed up whilst in full MIDI mod...
Continue reading ...
 
 
 
 
 
 
 

(]E_T[) 

Eksovichea Tito Hak 

London, UK 




 



 

 
 
 
 
 
Make a Free Website with Yola.